1. The color surface has no obvious
penetration after laminating with corrugated board. Through the edge is now
often caused by too much glue or moisture, is a common paper mounting failure
in packaging printing in china.
2. The deviation between the color surface
and corrugated board is less than 3mm.
3. After laminating, the thickness loss of
corrugated board is less than 2%. The thickness of corrugated board will be
lost after mounting process operation, but if the thickness is reduced too
much, it will affect the use of cartons.
4. In the process of laminating and
flattening the color surface and corrugated board, the color surface pattern
shall not have any damage. The purpose of our paper mounting process is to get
the same good visual effect as printing, so it can not be ignored to ensure the
gorgeous design for packaging printing in china.
5. The color surface is firmly bonded with
corrugated board, and the degumming area is less than 1% of the overall area
after completely bonding after flattening. And the degumming position does not affect
the quality of the finished product, otherwise it is waste.
6. Veneer
finishing to ensure the normal production of die-cutting process. General
corrugated paperboard mounting paper, to die-cutting machine processing, so
mounting paper finishing is also very important in packaging printing in
china.
